Guide Backup Synology DiskStation (DSM5.0)/en

Aus EUserv Wiki

(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
(Backup Settings)
Zeile 146: Zeile 146:
====Backup Settings====
====Backup Settings====
-
* Under ''Task'' enter the name of the backup task and under ''Directory'' the location of your desired backup directory. Then click '''Apply'''
+
* Under ''Task'' enter the name of the backup task and under ''Directory'' the location of your desired backup directory. Select '''Enable transfer encryption'''. Then click '''Apply'''
<center>
<center>
Zeile 154: Zeile 154:
* Now your DiskStation is doing the backup task to your rsync server. The backups will be saved in a sub-folder called "[SourceServerName]_[MAC address]" on the destination server.
* Now your DiskStation is doing the backup task to your rsync server. The backups will be saved in a sub-folder called "[SourceServerName]_[MAC address]" on the destination server.
-
 
==Status check and manual data backup and modify previous settings==
==Status check and manual data backup and modify previous settings==

Version vom 15:32, 14. Aug. 2014

Setting up rsync backup with Synology DiskStation (DSM 5.0)

Inhaltsverzeichnis

Setting up rsync backup with Synology DiskStation (DSM 5.0)

General

A NAS is a storage medium with a network connection, data can be stored centrally and are Network & Internet available at all times. For this purpose Synology provides a feature-rich and intuitive software.


Before You Start

This article assumes that you have done the following tasks for your DiskStation:

  • Hardware installation for Synology NAS.
  • Software installation for Synology DiskStation Manager (DSM, web-based operating system of Synology NAS).

Note

  • Under Linux only the accounts "admin", "root" and "rsync" are allowed to perform backup tasks.
  • If you are backing up files from a DiskStation to your own rsync-compatible server, you will need to input the correct rsync backup account name and password. You will also need to choose the correct backup module with Write privilege.

There are 2 backup modes for backing up from Synology DiskStation to your rsync-compatible server:

  1. remote shell mode > mode will be enabled only when you enter an absolute path (starting with "/") in Backup module, and it only supports encrypted backup.
  2. rsync > is used when you select a backup module (shared folder on the rsync-compatible server) from the drop-down menu next to Backup module.


Creating volumes and shared folders

To create a shared folder, proceed as follows:

  • Log in to DSM 5.0 with your user credentials.
  • Go to Main Menu > Control Panel > Shared Folder.


Datei:Synology_v5.0eng_1.png


Assign folder name

  • Select Create and under name enter the name of the folder. Then Click OK.


Datei:Synology_v5.0eng_2.png


Assign Read/Write privilege

  • Under Permissions assign the Read/Write privilege to the users. Then Click OK.


Datei:Synology_v5.0eng_3.png


Back up data from Synology NAS to another server

To Back up Synology NAS server data to another server, proceed as follows:

  • Go to Main Menu > Backup and Replication.


Datei:Synology_v5.0eng_4.png


  • Select Backup > Create > Data backup task.


Datei:Synology_v5.0eng_4.5.png


Select source and destination

  • Under Source and destination select the shared folder to backup.
  • Under Backup Destination > arrow down select Add Backup Destination.


Datei:Synology_v5.0eng_5.png


Note: If you already have set a Backup Destination, proceed as follows:

  • Press Escape
  • Click on Cancel


Datei:Synology_v5.0eng_11.png


  • Go to Backup Destination
  • Click Delete


Datei:Synology_v5.0eng_12.png


  • Repeat the steps from Point 3.0.


Where would you like to store backup data?
  • Under Where would you like to store backup data? select Network Backup Destination (rsync-compatible server) and then Next.


Datei:Synology_v5.0eng_6.png


Back up data to an rsync-compatible server

Under Back up data to an rsync-compatible server enter the Backup destination name, server name or IP address, login credentials and the backup module. Note: backup module = Username


Datei:Synology_v5.0eng_7.png


  • Under Select source and destination click Next.


Datei:Synology_v5.0eng_8.png


Backup Settings

  • Under Task enter the name of the backup task and under Directory the location of your desired backup directory. Select Enable transfer encryption. Then click Apply

Datei:Synology_v5.0eng_9.png


  • Now your DiskStation is doing the backup task to your rsync server. The backups will be saved in a sub-folder called "[SourceServerName]_[MAC address]" on the destination server.

Status check and manual data backup and modify previous settings

To see the status of your backup, perform a (immediate) manual backup or change the previous settings, proceed as follows:

  • Go to Main Menu > Backup and Replication > Backup. The current status is displayed.
  • Click on the relevant task (line marked in blue) and choose between:
  1. Create (create new backup)
  2. Edit (edit selected task)
  3. Delete delete selected task)
  4. Backup now (backup will be executed immediately)


Datei:Synology_v5.0eng_10.png