Live Monitoring System/en

Aus EUserv Wiki

(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
(The following steps are required to use LMS on your server:)
Zeile 10: Zeile 10:
== The following steps are required to use LMS on your server: ==
== The following steps are required to use LMS on your server: ==
 +
 +
The Live Monitoring System (LMS) requires curl. On most systems, this is already installed. Curl should not be installed on the system, it has to be installed.
Download the LMS from our servers via wget:  
Download the LMS from our servers via wget:  

Version vom 09:21, 11. Okt. 2012

Integrating the Live Monitoring System

Inhaltsverzeichnis

Integrating the Live Monitoring System on Root Server

General

In this article we are explaining how to use the EUserv Live Monitoring System (LMS) on your server.

The following steps are required to use LMS on your server:

The Live Monitoring System (LMS) requires curl. On most systems, this is already installed. Curl should not be installed on the system, it has to be installed.

Download the LMS from our servers via wget:

  wget --no-check-certificate https://cdn.euserv.com/ressources/lms/live_monitoring_system

Copy the LMS to its point of destination and make it executable:

  mv live_monitoring_system /usr/local/bin/
  live_monitoring_system && chmod 700 /usr/local/bin/live_monitoring_system

Add the following line to the file /etc/crontab

  echo "*/5 * * * * root /usr/local/bin/live_monitoring_system" >>/etc/crontab

Make sure you have installed "curl" and the cron service is running and loaded at the system start.

  Debian
  update-rc.d cron enable 2
  Redhat/CentOS
  chkconfig crond on Done. 

Now you can see the status of your server in the customer center (after selecting your server contract).