WebDAV Zugang für BackupHD/en

Aus EUserv Wiki

(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
Zeile 102: Zeile 102:
<br>
<br>
Now your BackupHD should be visible as a drive in the Windows Explorer.
Now your BackupHD should be visible as a drive in the Windows Explorer.
 +
 +
==== Troubleshooting performance problems under Windows 7 ====
 +
 +
Under Windows 7 performance issue may occur when using WebDAV (slow directory listing, timeouts etc.)
 +
The following can be done to fix the isse:
 +
 +
* Start Internet Explorer
 +
* Click "Tools" --> "Internet Options"
 +
* Click the "Connections" tab followed by "LAN Settings"
 +
* De-select "Automatically detect settings"
 +
* Finally Click "OK"

Version vom 08:22, 23. Dez. 2014

WebDAV access for my BackupHD

Inhaltsverzeichnis

WebDAV access for my BackupHD

General

In order to use WebDAV for your BackupHD you will have to enable the function in the customer center. To do that select your contract, navigate to the men point "Verwaltung" and make the tick at "Webdav aktiv". After that click "Ändern". Your BackupHD will be activated for WebDAV within 24 hours.


Guide for Windows XP

Please note that ServicePack 2 is required at least.

Open "My Computer" (Start -> "My Computer") and select "Tools -> Map Network Drive":

Datei:1 Arbeitsplatz.jpg


In the following dialogue click "Sign up for online storage or connect to a network server":

Datei:2 mit Netzwerkserver verbinden.jpg


Click "Next" in the following dialogue.

Select "Choose another network location" and click "Next"

As "Internet or network address" enter the address of the WebDAV access according to the following pattern:

https://<webdavserver>/<FTP-username>/

=> This information can be found in the customer center under "Verwaltung"

e.g. https://webdav1.kundencontroller.de/ftpbackup-11111/

Datei:3 url eingeben.jpg


=> In case you are receiving a message saying the folder is "invalid", this is due to WindowsXP. Conduct all updates and install the latest Service Pack and try again.

Click "Next".

Enter your FTP username and password into the following dialogue field and click OK:

Datei:4 Benutzerdaten eingeben.jpg


Now name the shared folder with a desired label/name and click "Next". Click "Finish" finally.

Datei:5 Fertigstellen.jpg


Now you will find the folder under "My Network Places" and can use it from here. Windows XP does not allow assigning a drive letter to the WebDAV share. Also opening files is not possible. The files have to be copied locally first. That's a restriction of WindowsXP. Starting from Windows Vista this restriction isn't existent anymore.

Guide for Windows Vista / Windows 7

To set up the WebDAV access under Windows Vista / Windows 7 please proceed as follows:

Open the start menu and right-click on "Computer" or "Network". The menu command "Map Network Drive" will appear in the context menu.

Datei:1 Computer - Netzlaufwerk verbinden.jpg


You will see a dialogue where you have to enter the address of the WebDAV server.

Select a vacant drive letter and enter the WebDAV address in the "Folder" field, according to the following pattern:

https://<webdavserver>/<FTP-username>/

=> This information can be found in the customer center under "Verwaltung"

e.g. https://webdav1.kundencontroller.de/ftpbackup-11111/

Click "Connect using a different user name" and enter the FTP username and FTP password from the customer center as user name and password respectively. Finally click "Finish".

Datei:2 Serverdaten eingeben.jpg


Enter the access data once again.

Datei:3 Anmeldedaten eingeben.jpg


Now your BackupHD should be visible as a drive in the Windows Explorer.

Troubleshooting performance problems under Windows 7

Under Windows 7 performance issue may occur when using WebDAV (slow directory listing, timeouts etc.) The following can be done to fix the isse:

  • Start Internet Explorer
  • Click "Tools" --> "Internet Options"
  • Click the "Connections" tab followed by "LAN Settings"
  • De-select "Automatically detect settings"
  • Finally Click "OK"