Kundencenter vServer Rescue System/en
Aus EUserv Wiki
(→General) |
(→Preparing a rescue system) |
||
| Zeile 14: | Zeile 14: | ||
== Preparing a rescue system == | == Preparing a rescue system == | ||
| - | In the EUserv customer service center, you have the possibility to activate the rescue system for your virtual server | + | In the EUserv customer service center, you have the possibility to activate or deactivate the rescue system for your virtual server. |
Choose your virtual server contract for which you want to change the rescue system settings. | Choose your virtual server contract for which you want to change the rescue system settings. | ||
| Zeile 35: | Zeile 35: | ||
=== (de-) activate the rescue system === | === (de-) activate the rescue system === | ||
| - | If you want to start the rescue system for your virtual server | + | If you want to start the rescue system for your virtual server, click below the "Rescue-System" on "aktivieren". If you want to stop the rescue system again, click on "deaktivieren". You can see the current status on the (de-) activate button. Note, that the normal system is not accessible when you activate the rescue system! |
<br> | <br> | ||
<br> | <br> | ||
| Zeile 46: | Zeile 46: | ||
=== start the rescue system === | === start the rescue system === | ||
| - | To connect your virtual server after the activation of the rescue system, use | + | To connect your virtual server after the activation of the rescue system, use a SSH program and connect via the main IP address and the default password with the virtual server. |
Version vom 15:35, 14. Nov. 2012
| Languages: |
Deutsch |
Use of the rescue system
Inhaltsverzeichnis |
Use of the rescue system
General
If you have an EUserv virtual server plan, there is a possibility to comprehensively configure it in the customer service center.
You also need special parameters that you can find in the customer service center, too.
With the functions of the rescue system, you have the opportunity to connect to your virtual server, if a system installation was not successful or the virtual server is not accessible via the usual way. You can still save data from your virtual server without running the operating system. Furthermore, you can correct any software defects with the rescue system. You have full access to your file system, so you could replace corrupted files and repair your system.
Preparing a rescue system
In the EUserv customer service center, you have the possibility to activate or deactivate the rescue system for your virtual server.
Choose your virtual server contract for which you want to change the rescue system settings.
Once you have selected your virtual server contract, click on "Rescue-System".
(de-) activate the rescue system
If you want to start the rescue system for your virtual server, click below the "Rescue-System" on "aktivieren". If you want to stop the rescue system again, click on "deaktivieren". You can see the current status on the (de-) activate button. Note, that the normal system is not accessible when you activate the rescue system!
start the rescue system
To connect your virtual server after the activation of the rescue system, use a SSH program and connect via the main IP address and the default password with the virtual server.
