Kundencenter Server IP Adressen/en

Aus EUserv Wiki

(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
(General)
 
(Der Versionsvergleich bezieht 12 dazwischenliegende Versionen mit ein.)
Zeile 2: Zeile 2:
[[Kategorie:Customer center Servers]]
[[Kategorie:Customer center Servers]]
[[Kategorie:Servers]]
[[Kategorie:Servers]]
-
'''''Manage the Server IP addresses'''''
+
'''''Manage the server IP addresses'''''
__TOC__
__TOC__
<div style= "font-size: 1.571em;">
<div style= "font-size: 1.571em;">
-
'''Manage the Server IP addresses'''
+
'''Manage the server IP addresses'''
</div>
</div>
== General==
== General==
-
If you have an EUserv server tariff, there is a possibility to comprehensively configure it in the customer service center.
+
If you have an EUserv server plan, there is a possibility to comprehensively configure it in the customer service center.
-
You also need special parameters that you can find in the customer service center.
+
You also need special parameters that you can find in the customer service center, too.
-
With the option "IP-Adressen", the IP addresses which are assigned to the server can be viewed. Additional IP addresses can be applied as an additional IP (co-IP) if this option exists in the tariff.
+
With the option "IP-Adressen", the assigned IP addresses can be viewed to the server. Other IP addresses can be applied as an additional IP (co-IP) if the present rate exist.
== Display IP addresses ==
== Display IP addresses ==
Zeile 18: Zeile 18:
In the EUserv customer service center, you have the possibility to activate and deactivate the IP addresses for your server.
In the EUserv customer service center, you have the possibility to activate and deactivate the IP addresses for your server.
-
Choose your server contract for which you want to change or display the IP addresses.
+
Choose the server contract for which you want to change or display the IP addresses.
<br>
<br>
<br>
<br>
Zeile 26: Zeile 26:
<br>
<br>
<br>
<br>
-
Once you have selected your contract, click on "IP-Adressen" below Server.
+
Once you have selected your contract, click on "IP-Adressen".
<br>
<br>
<br>
<br>
Zeile 35: Zeile 35:
<br>
<br>
-
=== Create IP addresses ===
+
== Create IP addresses ==
-
If you want to add more IPs to your server, you can do it also in the menu "IP-Adressen".
+
If you want to add more IPs to your server, you can do this also in the menu "IP-Adressen".
-
Click the drop-down menu to the desired IP address and confirm your choice by clicking on "Anlegen".
+
Use the drop-down menu and select the desired IP address and confirm your choice by clicking on "Anlegen".
 +
 
 +
In case you need an IP with a MAC address which is compatible with VMware, please check '''VMware kompatible Mac-Adresse nutzen''' first.
 +
 
 +
Please note: Depending on the contract, only a certain number of IP addresses is available.
 +
<br>
 +
<br>
 +
<center>
 +
[[Datei:Server_kundencenter_ipadressen.png | 572px]]
 +
</center>
 +
<br>
 +
<br>
 +
 
 +
== Assigning Failover-IP addresses ==
 +
 
 +
When using two or more servers inside EUserv's datacenter it may be necessary that an IP address has to be used on multiple servers. This function can be implemeted with EUserv's Failover-IP service.
 +
 
 +
Requirements for the use of the Failover-IP service are:
 +
 
 +
* Servers with Failover-IP support can connect an IP address to only one second server in the same customer account.
 +
* Both servers must support the Failover-IP function.
 +
* Server with enabled Pro Option can connect Failover-IP's to more than one other server.
 +
* Main IP addresses cannot be used for the Failover-IP service.
 +
 
 +
Do you want to assign Failover-IP's to your server, you can do it in the menu "IP-Addresses".
 +
 
 +
Click on "Change" under "Failover assignments".
 +
 
 +
<br>
 +
<br>
 +
<center>
 +
[[Datei:failover_ip_1_1_en.jpg | 572px]]
 +
</center>
 +
<br>
 +
<br>
 +
 
 +
Select your Failover assignment and click on "Save".
 +
 
 +
<br>
 +
<br>
 +
<center>
 +
[[Datei:failover_ip_2_1_en.jpg | 572px]]
 +
</center>
 +
<br>
 +
<br>
 +
 
 +
== Deleting Failover-IP addresses ==
 +
 
 +
If you want to delete Failover-IP's, you can do it in the menu "IP-Addresses'.
 +
 
 +
Click on "Change" under "Failover assignments".
 +
 
 +
<br>
 +
<br>
 +
<center>
 +
[[Datei:failover_ip_3_en.jpg | 572px]]
 +
</center>
 +
<br>
 +
<br>
 +
 
 +
Select "no assignment" and click on "Save".
-
Please note that depending on the contract only a certain number of IP addresses is available.
 
<br>
<br>
<br>
<br>
<center>
<center>
-
[[Datei:Server_ip-adressen-anlegen_572x.png]]
+
[[Datei:failover_ip_4_en.jpg | 572px]]
</center>
</center>
<br>
<br>
<br>
<br>

Aktuelle Version vom 09:51, 28. Nov. 2016

Manage the server IP addresses

Inhaltsverzeichnis

Manage the server IP addresses

General

If you have an EUserv server plan, there is a possibility to comprehensively configure it in the customer service center.

You also need special parameters that you can find in the customer service center, too.

With the option "IP-Adressen", the assigned IP addresses can be viewed to the server. Other IP addresses can be applied as an additional IP (co-IP) if the present rate exist.

Display IP addresses

In the EUserv customer service center, you have the possibility to activate and deactivate the IP addresses for your server.

Choose the server contract for which you want to change or display the IP addresses.

Datei:Kc-vertrag-wählen_572x.png



Once you have selected your contract, click on "IP-Adressen".

Datei:Server_vertragsdetails-ipadressen_572x.png



Create IP addresses

If you want to add more IPs to your server, you can do this also in the menu "IP-Adressen".

Use the drop-down menu and select the desired IP address and confirm your choice by clicking on "Anlegen".

In case you need an IP with a MAC address which is compatible with VMware, please check VMware kompatible Mac-Adresse nutzen first.

Please note: Depending on the contract, only a certain number of IP addresses is available.



Assigning Failover-IP addresses

When using two or more servers inside EUserv's datacenter it may be necessary that an IP address has to be used on multiple servers. This function can be implemeted with EUserv's Failover-IP service.

Requirements for the use of the Failover-IP service are:

  • Servers with Failover-IP support can connect an IP address to only one second server in the same customer account.
  • Both servers must support the Failover-IP function.
  • Server with enabled Pro Option can connect Failover-IP's to more than one other server.
  • Main IP addresses cannot be used for the Failover-IP service.

Do you want to assign Failover-IP's to your server, you can do it in the menu "IP-Addresses".

Click on "Change" under "Failover assignments".





Select your Failover assignment and click on "Save".





Deleting Failover-IP addresses

If you want to delete Failover-IP's, you can do it in the menu "IP-Addresses'.

Click on "Change" under "Failover assignments".





Select "no assignment" and click on "Save".