Kundencenter vServer Start Stop/en

Aus EUserv Wiki

(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
(General)
Zeile 10: Zeile 10:
If you have an EUserv vServer plan, there is a possibility to comprehensively establish it in the customer service center.
If you have an EUserv vServer plan, there is a possibility to comprehensively establish it in the customer service center.
-
You also need special parameters that you can find in the customer service center.  
+
You also need special parameters that you can find in the customer service center, too.  
With the function "Start/Stop", you have the possibility to stop your vServer temporarily or to start again. You can take your vServer "vom Netz", without the data loss or reinstalling is needed. A stop is not possible in the customer service center (after stop via Login restarts vServer to be on the safe mode)
With the function "Start/Stop", you have the possibility to stop your vServer temporarily or to start again. You can take your vServer "vom Netz", without the data loss or reinstalling is needed. A stop is not possible in the customer service center (after stop via Login restarts vServer to be on the safe mode)

Version vom 14:34, 19. Okt. 2012

Start/Stop a vServer

Inhaltsverzeichnis

Start/Stop a vServer

General

If you have an EUserv vServer plan, there is a possibility to comprehensively establish it in the customer service center.

You also need special parameters that you can find in the customer service center, too.

With the function "Start/Stop", you have the possibility to stop your vServer temporarily or to start again. You can take your vServer "vom Netz", without the data loss or reinstalling is needed. A stop is not possible in the customer service center (after stop via Login restarts vServer to be on the safe mode)

Preparing start/stop

In the EUserv customer service center, you have the possibility to start or stop your vServer.

Choose your vServer contract for which you want to start or stop.

Datei:kc-vertrag-wählen_572x.png


Once you have selected your vServer contract, click on "Start/Stop".

Datei:vserver_vertragsdetails_572x.png




Executing start/stop

If you want to stop your vServer "ausschalten", click on "vServer stoppen".

If you want to start again your vServer "anschalten", click on "vServer starten".

Datei:vserver_start-stop-status_572x.png



Activating/deactivating the start up

To start up automatically the vServer after a Reinstall, the start up must be activated. The "Autostart" is activated after the first initialization.

If you want to change this status, click on "Autostart deaktivieren".