Live Monitoring System/en

Aus EUserv Wiki

Integrating the Live Monitoring System

Inhaltsverzeichnis 1 General 2 The following steps are required to use LMS on your server:

General

In this article we are explaining how to use the EUserv Live Monitoring System (LMS) on your server.

The following steps are required to use LMS on your server:

Download the LMS from our servers via wget:

  wget --no-check-certificate https://cdn.euserv.com/ressources/lms/live_monitoring_system

Copy the LMS to its point of destination and make it executable:

  mv live_monitoring_system /usr/local/bin/
  live_monitoring_system && chmod 700 /usr/local/bin/live_monitoring_system

Add the following line to the file /etc/crontab

  echo "*/5 * * * * root /usr/local/bin/live_monitoring_system" >>/etc/crontab

Make sure you have installed "curl" and the cron service is running and loaded at the system start.

  Debian
  update-rc.d cron enable 2
  Redhat/CentOS
  chkconfig crond on Done. 

Now you can see the status of your server in the customer service center (after selecting your server contract).