Kundencenter vServer Start Stop/en
Aus EUserv Wiki
(Die Seite wurde neu angelegt: „{{Languages|Kundencenter_vServer_Start_Stop}} Kategorie:Kundencenter vServer Kategorie: vServer '''''Start/Stop a vServers''''' __TOC__ <div style= "font-…“) |
(→Startup enable/disable) |
||
| Zeile 44: | Zeile 44: | ||
=== Startup enable/disable === | === Startup enable/disable === | ||
| - | To allow to start automatically vServer after a pure stable, autostart must be enabled. " | + | To allow to start automatically vServer after a pure stable, autostart must be enabled. "Startup" is activated after the first initialization. If you liked to change this status, then click on "Disable Startup". |
Version vom 16:00, 26. Sep. 2012
| Languages: |
Deutsch |
Start/Stop a vServers
Inhaltsverzeichnis |
Start/Stop a vServers
General
If you have an EUserv vServer tariff, so there is the possibility to the EUserv Customer comprehensively establish.
You will also need to operate corresponding parameters that you read in the Customer and/or to adjust.
The function start/stop, you have the ability to stop your vServer temporarily and/or resume. So you can take your vServer 'net ", without data loss or reinstalling is needful. A stop is outside the MCC also not possible (to stop via login VPS starts precaution new)
Preparing Start/Stop
In EUserv Customer, you have the ability to start or stop your vServer. Select first from your vServer contract for which you want to start or stop.
Have you selected your vServer contract, now click on the menu item "Start/Stop" under vServer.
Executing Start/Stop
Do you want to stop your vServer, or "off", so click on "stop vServer". If you start again your vServer, "enable" are trying, just click on "Start vServer".
Startup enable/disable
To allow to start automatically vServer after a pure stable, autostart must be enabled. "Startup" is activated after the first initialization. If you liked to change this status, then click on "Disable Startup".
