Kundencenter vServer Start Stop/en

Aus EUserv Wiki

(Unterschied zwischen Versionen)

Wechseln zu: Navigation, Suche

Aktuelle Version vom 11:10, 22. Okt. 2012

Languages:

Deutsch • English

Start/Stop a virtual server

Inhaltsverzeichnis

1 General
2 Prepare start/stop
- 2.1 Execute start/stop
- 2.2 Activate/deactivate the start up

Start/Stop a virtual server

General

If you have an EUserv virtual server plan, there is a possibility to comprehensively configure it in the customer service center.

You also need special parameters that you can find in the customer service center, too.

With the function "Start/Stop", you have the possibility to stop your virtual server temporarily or to start it again. You can turn off your virtual server, without loosing data or a needed reinstall. A stop outside the customer service center is not possible (after you stoped your virtual server via login it restarts in the safe mode)

Prepare start/stop

In the EUserv customer service center, you have the possibility to start or stop your virtual server.

Choose your virtual server contract for which you want to start or stop.

Once you have selected your virtual server contract, click on "Start/Stop".

Execute start/stop

If you want to stop your virtual server "turn off", click on "vServer stoppen".

If you want to start again your virtual server "turn on", click on "vServer starten".

Activate/deactivate the start up

To start automatically the virtual server after a reinstall, the start up must be activated. The "Autostart" is activated after the first initialization.

If you want to change this status, click on "Autostart deaktivieren".

@@ Zeile 2: / Zeile 2: @@
 [[Kategorie:Customer center vServers]]
 [[Kategorie: vServers]]
-'''''Start/Stop a vServer'''''
+'''''Start/Stop a virtual server'''''
 __TOC__
 <div style= "font-size: 1.571em;">
-'''Start/Stop a vServer'''
+'''Start/Stop a virtual server'''
 </div>
 == General==
-If you have an EUserv vServer tariff, so there is the possibility to the EUserv Customer comprehensively establish.
+If you have an EUserv virtual server plan, there is a possibility to comprehensively configure it in the customer service center.
-You will also need to operate corresponding parameters that you read in the Customer and/or to adjust.
+You also need special parameters that you can find in the customer service center, too.
-The function start/stop, you have the ability to stop your vServer temporarily and/or restart. So you can take your vServer 'net ", without data loss or reinstalling is needed. A stop is outside the Customer also not possible (after stop via Login restarts vServer to be on the safe side)
+With the function "Start/Stop", you have the possibility to stop your virtual server temporarily or to start it again. You can turn off your virtual server, without loosing data or a needed reinstall. A stop outside the customer service center is not possible (after you stoped your virtual server via login it restarts in the safe mode)
-== Preparing Start/Stop ==
+== Prepare start/stop ==
-In EUserv customer center, you have the ability to start or stop your vServer. Select first from your vServer contract for which you want to start or stop.
+In the EUserv customer service center, you have the possibility to start or stop your virtual server.
+Choose your virtual server contract for which you want to start or stop.
 <br>
 <br>
@@ Zeile 23: / Zeile 25: @@
 </center>
 <br>
-Once you have selected your vServer contract, now click on the menu item "Start/Stop" under vServer.
+Once you have selected your virtual server contract, click on "Start/Stop".
 <br>
 <br>
@@ Zeile 32: / Zeile 34: @@
 <br>
 <br>
-=== Executing start/stop ===
-Do you want to stop your vServer, or "off", so click on "stop vServer". If you start again your vServer, "enable" are trying, just click on "Start vServer".
+=== Execute start/stop ===
+If you want to stop your virtual server "turn off", click on "vServer stoppen".
+If you want to start again your virtual server "turn on", click on "vServer starten".
 <br>
 <br>
@@ Zeile 43: / Zeile 48: @@
 <br>
-=== Startup enable/disable ===
+=== Activate/deactivate the start up ===
+To start automatically the virtual server after a reinstall, the start up must be activated. The "Autostart" is activated after the first initialization.
-To allow to start automatically vServer after a pure stable, startup must be enabled. "Startup" is activated after the first initialization. If you liked to change this status, then click on "Disable Startup".
+If you want to change this status, click on "Autostart deaktivieren".

Ansichten

Persönliche Werkzeuge

Navigation

Werkzeuge