Kundencenter vServer vServerdaten/en

Aus EUserv Wiki

(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
(Configuration data of the vServer)
(Hardware data virtual server)
 
(Der Versionsvergleich bezieht 13 dazwischenliegende Versionen mit ein.)
Zeile 2: Zeile 2:
[[Kategorie:Customer center vServers]]
[[Kategorie:Customer center vServers]]
[[Kategorie:vServers]]
[[Kategorie:vServers]]
-
'''''Setting up a vServer'''''
+
'''''Setting up a virtual server'''''
__TOC__
__TOC__
<div style= "font-size: 1.571em;">
<div style= "font-size: 1.571em;">
-
'''Setting up a vServer'''
+
'''Setting up a virtual server'''
</div>
</div>
== General==
== General==
-
If you have an EUserv vServer, you have the possibility to comprehensively establish it in the customer service center.
+
If you have an EUserv virtual server plan, there is a possibility to comprehensively configure it in the customer service center.
-
You also need special parameters that you can find in the customer service center.
+
You also need special parameters that you can find in the customer service center, too.
-
== Reading vServerdata ==
+
== Reading virtual server data ==
-
In EUserv customer center, you have the opportunity to read and edit various vServerdata.  
+
In the EUserv customer service center, you have the opportunity to read and edit various virtual server data.  
-
Choose your vServer contract for which you want to read or change the data.
+
Choose your virtual server plan for which you want to read or change the data.
<br>
<br>
<br>
<br>
Zeile 24: Zeile 24:
<br>
<br>
<br>
<br>
-
Once you have selected your vServer contract, now click on "vServerdaten" under vServer.
+
Now click on "vServerdaten".
<br>
<br>
<br>
<br>
Zeile 33: Zeile 33:
<br>
<br>
-
=== Configuration data of the vServer ===
+
=== Configuration of virtual server data ===
-
In the caption "Konfigurations-Daten des vServers" you will find all the data relating to the configuration of your vServer. It describes the first point of the current name of the server ("Servername: vserver.meinedomain.de").
+
In the caption "Konfigurations-Daten des vServers" you find all the data relating to the configuration of your virtual server. It describes the first point of the current name of the server ("Servername: vserver.meinedomain.de").
-
Under "Servername (Default)" in the beginning of the system the name is automatically assigned. This name can be referred to as "Reverse-Eintrag". This is for the solution and the name Mapping with the corresponding IP in difficulties.
+
Under the menu "Servername (Default)" you can find the server name that was given automatically in the beginning. This name is also called "Reverse-Eintrag". It is necessary for the resolution and the name association to the corresponding IP.  
-
In the field "Haupt IP-Adresse" contains the main IP address of your vServer. This IP address has been configured during installation and must be used as the main IP. You can not change this, your server is also primarily accessible at this IP address. If you want to create extra IP addresses for your server, please use the point IP addresses. For instructions, see [https://www.euserv.com/wiki/index.php/Kundencenter_vServer_IP_Adressen Here].
+
The field "Haupt IP-Adresse" contains the main IP address of your virtual server. This IP address has been configured during installation and has to be used as the main IP. You cannot change this, your server is also primarily accessible at this IP address. If you want to create extra IP addresses for your server, please use the point IP addresses. For instructions, see [https://www.euserv.com/wiki/index.php/Kundencenter_vServer_IP_Adressen here].
-
The "Netzmaske" indicates, how many bits put out the net prefix at the beginning of the represented IP address. If the net mask is e.g., 255.255.255.0 so the net prefix is 255.255.255. - i.e. all devices in this net have the same first 3 blocks of the IP address (e.g., 127.0.0.). The separate devices differ in the last block which places at disposal in theory 254 IP addresses on the network. The "Broadcast-Adresse" serves for the communication of the devices present on the network. It is also responsible for the fact that all devices in the same network will get the relevant data. As "Default-Gateway" refers to the router, which is responsible for the network interface point. And eventually even the "Default-Passwort", which will automatically created for access to your server. For Linux derivatives this password always applies to the administrator account (root).  
+
The menu "Netzmaske" shows, how many bits in the beginning of the displayed IP address the network prefix represents. If the net mask is 255.255.255.0, then the net prefix is 255.255.255. - e.g. all devices in this net have the same first 3 blocks of the IP address (e.g., 127.0.0.). The separate devices differ in the last block which places at disposal in theory 254 IP addresses on the network. The "Broadcast-Adresse" serves for the communication in the network devices. It is also responsible for ensuring that all devices in the same network will get the relevant data. As "Default-Gateway" refers to the router, which is responsible for the network interface point and eventually even the "Default-Passwort", which is automatically created to access your server. For Linux derivatives this password always applies to the administrator account (root).  
<br>
<br>
<br>
<br>
Zeile 50: Zeile 50:
<br>
<br>
-
=== Status of vServer ===
+
=== Status of virtual server ===
-
In the caption "Status des vServers" you can select the three parameters on the status of your vServer. The "Server-Status" shows you whether the server runs ("running") or not available ("n/a"). The point "letzter Check" indicates when the status of the vServer last was recalled (e.g., "2012-09-20 09:00:21"). And under "Autostart-Status" you can recognize whether an automatic Reboot is activated after an operating system installation, or not.  
+
In the caption "Status des vServers" you can select the three parameters on the status of your virtual server. The "Server-Status" shows you wether the server is running ("running") or is not available ("n/a"). The point "letzter Check" indicates when the status of the virtual server was last recalled "2012-09-20 09:00:21". Under "Autostart-Status" you can see if an automatic reboot is activated or not, after the installation of the operating system.
<br>
<br>
<br>
<br>
Zeile 61: Zeile 61:
<br>
<br>
-
=== Software data of vServer ===
+
=== Software data of virtual server ===
-
Under "Software-Daten des vServers" you get an overview, which operating system (OS) is currently installed on your vServer. You get not only information which version of the OS is installed, but also the language, whether it supports 64-bit hardware or in which phase of the Support status for the installed version.  
+
Under the menu "Software-Daten des vServers" you get an overview, which operating system (OS) is currently installed on your virtual server. You receive the information which version and language of the OS is installed, if it supports 64-bit hardware or in what phase of the support status the installed version is.
-
Furthermore, you can still see which versions of Apache, PHP and MySQL software is installed. You can save it for yourself, hence, it is inconvenient to get the server side access to these software information. Additionally, it is displayed whether the installation is complete ("Installation Status") and whether the rescue system is activated.
+
Furthermore, you can still see which versions of Apache, PHP and MySQL software is installed. You can save it for yourself, hence, it is inconvenient to get the server side access to these software information. Additionally, it is shown whether the installation is complete ("Installation Status") or the rescue system is activated.
<br>
<br>
<br>
<br>
Zeile 74: Zeile 74:
<br>
<br>
-
=== Hardware data vServer ===
+
=== Hardware data virtual server ===
-
Under "Hardware-Daten des vServers" you receive information about it on which Hostnode speaks on and which hardware of vServer is installed. This code number is a support requests of high relevance, as found quickly, which is in the context of hardware-server. The Hostnode will achieve your vServer order automatically selected by the system (depending on hardware utilization) and is not changeable by you.
+
Under the menu "Hardware-Daten des vServers" you receive information about which host node speaks on and which hardware of virtual server is installed. This code number is a support request of high relevance, as found quickly, which is in the context of hardware-server. The host node will be selected automatically by the system(depending on hardware utilization) with the conversion of your virtual server and is not changeable by you.
<br>
<br>
<br>
<br>

Aktuelle Version vom 10:13, 22. Okt. 2012

Setting up a virtual server

Inhaltsverzeichnis

Setting up a virtual server

General

If you have an EUserv virtual server plan, there is a possibility to comprehensively configure it in the customer service center.

You also need special parameters that you can find in the customer service center, too.

Reading virtual server data

In the EUserv customer service center, you have the opportunity to read and edit various virtual server data.

Choose your virtual server plan for which you want to read or change the data.

Datei:Kc-vertrag-wählen_572x.png



Now click on "vServerdaten".

Datei:Vserver_vertragsdetails_572x.png



Configuration of virtual server data

In the caption "Konfigurations-Daten des vServers" you find all the data relating to the configuration of your virtual server. It describes the first point of the current name of the server ("Servername: vserver.meinedomain.de").

Under the menu "Servername (Default)" you can find the server name that was given automatically in the beginning. This name is also called "Reverse-Eintrag". It is necessary for the resolution and the name association to the corresponding IP.

The field "Haupt IP-Adresse" contains the main IP address of your virtual server. This IP address has been configured during installation and has to be used as the main IP. You cannot change this, your server is also primarily accessible at this IP address. If you want to create extra IP addresses for your server, please use the point IP addresses. For instructions, see here.

The menu "Netzmaske" shows, how many bits in the beginning of the displayed IP address the network prefix represents. If the net mask is 255.255.255.0, then the net prefix is 255.255.255. - e.g. all devices in this net have the same first 3 blocks of the IP address (e.g., 127.0.0.). The separate devices differ in the last block which places at disposal in theory 254 IP addresses on the network. The "Broadcast-Adresse" serves for the communication in the network devices. It is also responsible for ensuring that all devices in the same network will get the relevant data. As "Default-Gateway" refers to the router, which is responsible for the network interface point and eventually even the "Default-Passwort", which is automatically created to access your server. For Linux derivatives this password always applies to the administrator account (root).

Datei:Vserver_vertragsdetails_572x.png



Status of virtual server

In the caption "Status des vServers" you can select the three parameters on the status of your virtual server. The "Server-Status" shows you wether the server is running ("running") or is not available ("n/a"). The point "letzter Check" indicates when the status of the virtual server was last recalled "2012-09-20 09:00:21". Under "Autostart-Status" you can see if an automatic reboot is activated or not, after the installation of the operating system.

Datei:Vserver_vserverdaten-status_572x.png



Software data of virtual server

Under the menu "Software-Daten des vServers" you get an overview, which operating system (OS) is currently installed on your virtual server. You receive the information which version and language of the OS is installed, if it supports 64-bit hardware or in what phase of the support status the installed version is.

Furthermore, you can still see which versions of Apache, PHP and MySQL software is installed. You can save it for yourself, hence, it is inconvenient to get the server side access to these software information. Additionally, it is shown whether the installation is complete ("Installation Status") or the rescue system is activated.

Datei:Vserver_vserverdaten-software_572x.png



Hardware data virtual server

Under the menu "Hardware-Daten des vServers" you receive information about which host node speaks on and which hardware of virtual server is installed. This code number is a support request of high relevance, as found quickly, which is in the context of hardware-server. The host node will be selected automatically by the system(depending on hardware utilization) with the conversion of your virtual server and is not changeable by you.

Datei:Vserver_vserverdaten-hardware_572x.png